Jackets & Outerwear

Tough enough to do the job, this work jacket layers easily over shirts and jackets so it's great for mild or harsh weather.. 12-ounce, 100% cotton duck cloth. 100% nylon dyed-to-match lining with 6-ounce polyfill insulation (Duck Brown has black lining). Hood with dyed-to-match drawcord. Rib knit cuffs and waistband. Front hand warmer pockets. Interior pocket. Decoration access pocket

Built to layer over hoodies or tees, this tough, water-resistant shirt jac delivers a clean look both on and offsite.. 100% polyester with water-resistant finish. 100% polyester fleece lining. Fabric waterproof rating: 1000MM. Fabric breathability rating: 1000G/M2. Triple-needle stitching. Full snap closure. Two chest pockets with flaps and snap closures. Reinforced open front pockets. Adjustable snap cuffs. Side vents

Built for demanding job sites, the CornerStone Insulated Workwear Soft Shell jacket provides dependable protection from wind, light rain, and cold conditions.Its durable soft-shell exterior stands up to the daily wear and tear that construction workers, electricians, plumbers, and HVAC technicians face.The insulated interior helps retain warmth during early mornings and long outdoor shifts without restricting movement while climbing, lifting, or bending.The multiple functional pockets make it easy to keep tools, phones, and small equipment close at hand.With a professional workwear look and rugged design, it's a practical layer for anyone who spends long hours on an active job site.

The CornerStone Heavyweight Sherpa-Lined Hooded Fleece Jacket CS625 is built for people who work hard in cold and unpredictable weather.Its heavyweight fleece exterior combined with a warm sherpa lining helps keep you comfortable during long hours on the jobsite.The durable construction makes it ideal for demanding environments like construction sites, warehouses, and outdoor maintenance work.The built-in hood adds extra protection against wind and light rain when conditions suddenly change.With practical warmth and rugged durability, this jacket is a dependable layer for workers who need gear that performs as hard as they do.

The CornerStone Elements Insulated Parka is built for people who work in harsh outdoor environments and need dependable protection from the cold.Its insulated design helps retain body heat during long hours outside, while the water-resistant outer shell helps keep rain, snow, and wind from slowing you down.Its durable materials and reinforced construction make this jacket ideal for construction sites, utility work, and other demanding jobs.The longer parka length adds extra coverage and warmth, helping workers stay comfortable throughout the workday.If you need reliable outerwear that can handle tough conditions, this parka is designed to work as hard as you do.

Hardworking duck cloth and durable fleece join in this faux layered, inseparable 2-in-1 jacket.. 100% cotton duck cloth body. 8.8-ounce, 70/30 cotton/polyester fleece hood and sleeves. 6-ounce, polyfill insulation. Triple-needle stitching throughout. Self-fabric 3-panel hood with metal-tipped drawcords. Locker loop. Rib knit collar and cuffs. Metaluxe zipper with long YKK pull for ease of use while wearing gloves. Front pouch pockets. Decoration access pocket

12-ounce, 100% cotton duck cloth. 6-ounce polyfill nylon lining for added warmth. Corduroy collar. Bi-swing back. Zippered chest pocket. Adjustable 2-snap sleeves. Front slash pockets. Adjustable button waist tabs. Port Pockets for easy embroidery access.

12-ounce, 100% cotton duck cloth. 6-ounce polyfill nylon lining for added warmth. Hood with dyed-to-match drawcord. Rib knit cuffs and waistband. Front hand warmer pockets. Port Pockets for easy embroidery access.

The CornerStone Duck Bonded Soft Shell Jacket is built to handle demanding work environments where durability and comfort are essential.Its rugged duck cloth exterior stands up to tough conditions on construction sites, workshops, and industrial settings.Inside, the soft microfleece lining provides warmth during cold mornings and late shifts without adding unnecessary bulk.The water-resistant design helps protect you from light rain and wind while you stay focused on the job.With practical pockets and a comfortable fit, this jacket is reliable workwear for professionals who need gear that works as hard as they do.

When the weather turns, pull on these water-resistant pants and continue working safely.. 100% polyester oxford with water-resistant finish. Black bottom lower legs for a cleaner appearance. Durable, reflective 2-inch tape provides 360-degree visibility on legs. Fully seam sealed. Elastic waistband with drawcord. Adjustable snap leg openings

Stay safe and dry in style with this feature-packed parka! Made from a durable 300-denier ripstop polyester shell with a 5,000mm waterproof rating, this item repels rain and keeps you visible in low-light conditions thanks to the 2-inch reflective tape. The fully seam-sealed build and adjustable rain hood ensure complete protection from the elements. For added functionality, it boasts a vented cape back, a right chest pocket with a retractable ID holder, two lower pockets, and a center zippered pocket that fits a tablet. The elastic hem and gusseted cuffs provide a comfortable, adjustable fit, while the decoration access pocket allows for easy customization. This stylish product is a versatile choice for any work environment!

100% polyester 300-denier ripstop shell with durable water-repellent (DWR) finish. 4.6-ounce, 100% poly microfleece upper body lining. 3-ounce quilted polyfill lower body lining. 2-ounce quilted polyfill hood and sleeve lining. Black bottom front and lower sleeves for a cleaner appearance. Fabric waterproof rating: 5000MM. Fully seam-sealed. Adjustable rain hood. Durable, reflective 2-inch tape meets ANSI 107 requirements. Full-length exterior storm flap. Left chest pocket. Right chest pocket. Two lower front pockets. Center front zippered pocket to hold a tablet. Mic clips at shoulders. Elastic cuffs. Elastic hem. Decoration access pocket. This garment must be fully zipped to be in compliance with ANSI 107 standards

This warm performance soft shell combines superior weather protection with the highest class of visibility.. 100% polyester woven shell with durable water-repellent (DWR) finish bonded to a water-resistant, breathable film insert and a 100% polyester microfleece lining. Black bottom front and lower sleeves for a cleaner appearance. Fabric waterproof rating: 5000MM. Fabric breathability rating: 5000G/M2. Full-length interior storm flap with chin guard. Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves; tape is bonded to fabric. Molded right chest, hand and center front zippers with rubber pulls. Mic clips at shoulders. Elastic cuffs with adjustable hook and loop closures and rubber tabs. Adjustable drawcord hem. This garmen...

This lightweight jacket is jobsite-ready, provides protection against the rain and meets the highest class of visibility.. 100% polyester oxford with water-resistant finish. Black bottom front and lower sleeves for a cleaner appearance. Fully seam sealed. 3-panel hood that stows in collar. Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves. Full-length exterior storm flap with snap closure. Adjustable cuffs with hook and loop closures. Two lower front pockets with flaps. Adjustable drawcord hem. This garment must be fully zipped to be in compliance with ANSI 107 standards

100% polyester woven 300-denier oxford shell with durable water-repellent (DWR) finish. 5.2-ounce, 100% polyfill insulation, box diamond quilted body and sleeve lining. Black bottom front and lower sleeves for a cleaner appearance. Fabric waterproof rating: 5000MM. Fully seam-sealed. Adjustable, zip-removable rain hood with hook and loop closure and toggles. Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility. Full-length exterior storm flap. Left chest bellows pocket. Two open lower front pockets. Molded center front zippered closure. Elastic cuffs. Elastic hem. Decoration access pocket. This garment must be fully zipped to be in compliance with ANSI 107 standards

Designed for visibility, this durable heavyweight hoodie is also warm and comfortable.. 8.6-ounce, 100% polyester smooth-faced fleece. Black bottom front and cuffs for a cleaner appearance. Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves. Three-panel hood with drawcord closure. Taped neck. Front pouch pockets. Molded center front zippered closure. Rib knit cuffs and hem. This garment must be fully zipped to be in compliance with ANSI 107 standards

Heavyweight cotton-rich comfort meets unparalleled performance in this work-ready job shirt. It features a proprietary fabric treatment that lends superior abrasion resistance and improved colorfastness for the life of the garment.. 12-ounce, 85/15 cotton/polyester fleece. Anti-abrasion. YKK Vislon molded zipper. Mic clips at placket and shoulders. Right chest pocket with integrated pen pocket and interior hook and loop compartments. Dual pen pocket on left sleeve. Woven duck cloth elbow patches. On-seam side pockets. 2x2 rib knit cuffs and hem

Built for tough jobs and long workdays, the CornerStone Duck Cloth Work Jacket delivers the durability professionals rely on.The heavyweight duck cloth exterior resists wear, abrasion, and harsh job-site conditions, making it ideal for construction, mechanical work, and other demanding trades.The warm insulated lining helps keep you comfortable during cold mornings or outdoor tasks in winter conditions.Its practical design allows easy movement while working, whether you're climbing ladders, carrying tools, or working on equipment.With dependable performance and a rugged feel, this jacket is made for people who expect their workwear to last.

For workers in warehouses, factories, and industrial environments, the CornerStone Duck Cloth Hooded Work Jacket provides both durability and warmth.The heavy-duty duck cloth exterior is designed to resist wear and tear from daily tasks like lifting, moving equipment, or operating machinery.Its insulated lining helps maintain warmth in cooler indoor environments or outdoor loading areas.The practical hood and sturdy construction make it ideal for workers who need reliable protection throughout long shifts.This jacket offers a professional, hardworking look while delivering the performance required in busy industrial settings.

Emergency responders and roadside assistance crews require reliable safety gear that performs in high-risk situations.The CornerStone ANSI 107 Class 3 Waterproof Parka improves visibility when responding to accidents, breakdowns, or hazardous road conditions.Bright colors and reflective striping help approaching drivers identify responders quickly, especially during nighttime or stormy weather.The waterproof construction keeps responders dry and mobile when working long hours in rain or snow.Built for durability and comfort, this parka supports emergency teams as they manage unpredictable roadside environments.